SER-485-FXC industrial isolated converter n-tron networking series industrial isolated converter power source external power connector 2 position, removable terminal block input voltage 10 to 48 vdc (56 vdc max) power consumption 0.5 w (typical), 1.3w (w/ termination) power supply part # ntps 24-1.3 terminal blocks wire size accepted 28 to 12 awg pitch 5.08 mm insulation resistance 500 m @ 500 vdc maximum torque 5 kg / cm indicators power red led fo receive red led fo transmit red led mechanical dimensions 4.9 x 4.5 x 1.3 in (12.3 x 11.3 x 3.2 cm) enclosure ip 20 plastic, 35 mm din mount weight 0.44 lbs (199.6 g) mtbf 138904 hours mtbf calc. method parts count reliability prediction environmental op temperature - 40 to 80c (-40 to 176f) storage temp - 40 to 85c (-40 to 185f) op humidity 0 to 95% non-condensing regulatoryapprovals fcc, ce, ul class 1 div 2 groups a, b, c, d SER-485-FXC the industrial network company the SER-485-FXC is our premium industrial serial to multi-mode fiber optic converter. designed for rugged industrial environments, it is ul approved and certi? ed for use in class 1 division 2 environments. in addition to direct point-to-point connectivity, it is capable of operating in a multi-drop mode. this allows one se- rial device to communicate with up to 31 other devices around a ? ber ring. since it supports mixed standards, you can replace other converters and isolators and add the emi / rfi protection inherent to ? ber optic communications. product features ? data rates up to 115.2 kbps ? 10 C 48 vdc input power range ? wide operating temperature ? 3-way 2000v optical isolation ? modbus ascii/rtu compatible ? emi / rfi protection ? ul class 1 div 2 ? built-in, switchable termination & bias product overview in rs-232 mode, the converter supports transmit and receive data. handshaking signals are not passed through. an automatic send data control circuit controls the rs-422/485 driver chip, eliminating the requirement for external software. easy to install and configure, it has a 12 position dip switch on the bottom to configure rs-422/485 parameters. the serial data and power cables connect to removable terminal blocks. st connectors are used for the ? ber. speci? cations serial technology rs-232 td, rd, gnd rs-485 2-wire data a(-), data b(+), gnd rs-422/485 4-wire tda(-), tdb(+), rda(-), rdb(+), gnd serial connector 5 position, removable terminal block data rate 9.6 to 115.2 kbps isolation 2kv rms, 1 minute surge protection 600 w peak power dissipation clamping time < 1 pico-second industrial bus modbus ascii/rtu bias built-in, switchable, 1.2k termination built-in, switchable, 120 fiber optic technology type / wavelength multimode / 820 nm output power -16dbm min, -12dbm typ. -9dbm max receive sensitivity -24dbm min, -25.4dbm max cable 62.5/125 micro-meter connector st data rate 9.6 to 115.2 kbps maximum distance 2.5 miles (4 km) idle state transmitter light on
SER-485-FXC specifications as the global experts in communication, monitoring and control for industrial automation and networking, red lion has been delivering innovative solutions for over forty years. our award-winning technology enables companies worldwide to gain real-time data visibility that drives productivity. product brands include red lion, n-tron and sixnet. with headquarters in york, pennsylvania, the company has offces across the americas, asia-pacifc and europe. for more information, please visit www.redlion.net. red lion is a spectris company. www.redlion.net connect. monitor. control. adld0240 070313 ?2013 red lion controls americas sales@redlion.net asia-pacifc asia@redlion.net europe middle east africa europe@redlion.net +1 (717) 767-6511 the industrial network company ? 2009 n-tron , corp. , n-tron and the n-tron logo are trademarks of n-tron , corp. product names mentioned herein are for identi ? cation purposes only and may be trademarks and/or registered trademarks of their respective company. speci ? cations subject to change without notice. the responsibility for the use and application of n-tron products rests with the end user. n-tron makes no warranties as to the ? tness or suitability of any n-tron product for any speci ? c application. n-tron corporation shall not be liable for any damage resulting from the installation, use, or misuse of this product. printed in usa. rev 100419 contact information n-tron corp. n-tron asia n-tron europe gmbh 820 s. university blvd., suite 4e suite #: 2267, 22/f, one lujiazui alte steinhauserstr 19 mobile, al 36609 usa 68 yin cheng road center, 6330 cham / zg switzerland tel: (251) 342-2164 pudong new area tel: +41 41 7406636 fax: (251) 342-6353 200120 shanghai, p.r. china fax: +41 41 7406637 website: www.n-tron.com phone: +86 (0) 21 6194 6777 email: n-tron_info@n-tron.com fax: +86 (0) 21 6194 6699
|